LG Dishwasher Cl Code

Understanding the error codes on your LG dishwasher can be a bit daunting, but don’t worry—I’m here to help you navigate through them. These codes are designed to alert you to specific issues, allowing you to troubleshoot effectively. Let’s delve into the most common LG dishwasher error codes, their meanings, possible causes, and suggested solutions.

Common LG Dishwasher Error Codes

Here’s a comprehensive list of common error codes you might encounter, along with their meanings:

Error Code	Meaning
IE	Inlet Error
OE	Outlet Error
AE or E1	Leak Detected
FE	Water Overflow Detected
tE	Thermistor (Temperature Sensor) Failure
LE	Locked Motor Error
HE	Heater Error
nE	Diverter Motor Failure
CL	Child Lock Activated
bE	Improper Detergent or Suds Detected
CE	Motor Error
PF	Power Failure

Now, let’s break down each of these codes to understand their causes and solutions.

IE Error Code: Inlet Error

Possible Causes:

• Water supply valve is turned off.
• Inlet hose is kinked or bent.
• Low water pressure.
• Clogged inlet filter.

Solutions:

1. Check Water Supply: Ensure that the water supply valve is fully open.
2. Inspect Inlet Hose: Look for kinks or bends in the hose and straighten them.
3. Verify Water Pressure: Confirm that the water pressure is between 20 – 120 PSI. If it’s too low, contact a plumber.
4. Clean Inlet Filter: Disconnect the inlet hose and clean the filter screen to remove any debris.

For more detailed troubleshooting, you can refer to LG’s official support page. citeturn0search0

OE Error Code: Outlet Error

Possible Causes:

• Clogged drain filter.
• Drain hose is kinked or bent.
• Blocked sink drain or garbage disposal.

Solutions:

1. Clean Drain Filter: Remove and clean the filter located at the bottom of the dishwasher.
2. Inspect Drain Hose: Ensure the hose is not kinked or bent and is installed at the correct height (at least 10 inches above the floor).
3. Check Sink Drain: Make sure the sink drain and garbage disposal are free from blockages.

Additional guidance can be found on LG’s support page. citeturn0search0

AE or E1 Error Code: Leak Detected

Possible Causes:

• Water leakage inside the dishwasher.
• Excessive suds from improper detergent use.

Solutions:

1. Inspect for Leaks: Check for visible water leaks around the dishwasher.
2. Avoid Dish Soap: Use only detergents specifically designed for dishwashers to prevent excessive suds.
3. Level the Dishwasher: Ensure the dishwasher is properly leveled to prevent water from accumulating at the base.

For more information, visit LG’s support page. citeturn0search0

FE Error Code: Water Overflow Detected

Possible Causes:

• Faulty water inlet valve.
• Stuck relay on the electronic control board.

Solutions:

1. Test Water Inlet Valve: Unplug the dishwasher and see if water continues to fill. If it does, the inlet valve may need replacement.
2. Inspect Control Board: A stuck relay might cause continuous filling; this may require professional service.

Detailed troubleshooting steps are available on LG’s support page. citeturn0search0

tE Error Code: Thermistor (Temperature Sensor) Failure

Possible Causes:

• Faulty thermistor.
• Wiring issues.

Solutions:

1. Check Wiring Connections: Ensure all wiring to the thermistor is secure.
2. Replace Thermistor: If faulty, the thermistor may need to be replaced.

For more details, refer to LG’s support page. citeturn0search0

LE Error Code: Locked Motor Error

Possible Causes:

• Obstructed pump impeller.
• Loose wiring connections.
• Faulty motor.

Solutions:

1. Inspect Pump Impeller: Remove any obstructions from the sump area.
2. Check Wiring: Ensure all connections to the motor are secure.
3. Test Motor: Use a multimeter to check motor resistance; replace if necessary.

Additional information can be found on LG’s support page. citeturn0search0

HE Error Code: Heater Error

Possible Causes:

• Faulty heating element.
• Defective thermistor.
• Wiring issues.

Solutions:

1. Test Heating Element: Check for continuity; replace if faulty.
2. Inspect Thermistor: Ensure it’s