Samsung Dryer Error Codes: Troubleshoot and Fix Common Issues

You’re in the middle of laundry day, and suddenly your Samsung dryer flashes an error code. Frustration sets in as you scramble to figure out what it means and how to fix it. Understanding these error codes can save you time and prevent unnecessary service calls.

Samsung dryers are equipped with a range of error codes to help you diagnose issues quickly. From minor hiccups to more significant problems, each code provides valuable insights into what’s going wrong. In this text, you’ll find a comprehensive guide to Samsung dryer error codes, so you can get back to your routine with minimal hassle.

Key Takeaways

Understand Error Codes: Recognizing Samsung dryer error codes allows for quick and effective troubleshooting, saving time and avoiding unnecessary service calls.
Common Codes and Solutions: Familiarize yourself with frequent error codes like bE (button issues), dE (door error), HE/HE1 (heating issues), and FE (frequency error) to diagnose and resolve issues promptly.
Regular Maintenance: Regular cleaning of the lint filter, ensuring proper ventilation, and inspecting electrical connections can prevent many common errors and extend your dryer’s lifespan.
Advanced Troubleshooting: For complex issues, understanding advanced error codes and their specific solutions, such as inspecting heating elements or updating firmware, is crucial.
Prevention Tips: Adopting preventive measures, like avoiding overloading and using appropriate settings, can significantly reduce the occurrence of error codes and improve dryer efficiency.

Samsung Dryer Error Codes Explained

Understanding error codes on your Samsung dryer helps diagnose and address issues efficiently. Each code corresponds to a specific problem, providing insights into what needs fixing. Below is an overview of common error codes and their meanings.

Common Samsung Dryer Error Codes

bE

Indicates a button issue often caused by a stuck button.

Solution: Check buttons and ensure none are stuck.

dE

Points to a door error, typically when the door isn’t properly closed.

Solution: Ensure the door is securely shut. Examine the door latch for damage.

HE or HE1

Relates to a heating issue, often due to faulty heating elements or thermistor problems.

Solution: Inspect the heating element and thermistor. Replace if necessary.

FE

Signals a frequency error which is generally tied to power supply issues.

Solution: Verify that the dryer is connected to the correct voltage. A qualified electrician might need to check the power supply.

Error Code Table

Error Code	Meaning	Possible Solution
bE	Button Issue	Check for stuck buttons
dE	Door Error	Ensure door is closed; inspect latch
HE, HE1	Heating Issue	Inspect heating element/thermistor; replace if faulty
FE	Frequency Error	Verify power supply and voltage

Steps to Troubleshoot Error Codes

Identify the Code: Check the display for the specific error code.
Reference the Table: Use the table above for initial diagnosis.
Follow Solutions: Carry out the suggested solutions for each error code.
Seek Professional Help: If issues persist, contact a professional technician.

Regular Cleaning: Clean the lint filter after every cycle to prevent build-up.
Ventilation: Ensure the dryer is well-ventilated to prevent overheating.
Check Connections: Regularly inspect power and water connections to ensure they are secure.

Understanding these error codes can help keep your Samsung dryer running smoothly, minimizing downtime and service calls. Regular maintenance also prevents many issues from arising.

Common Error Codes and Their Causes

Understanding Samsung dryer error codes can help resolve issues quickly. Below are detailed explanations of common errors and their causes.

Voltage Errors (9C1, 9E, 2E, 9E1)

Voltage errors indicate issues with the power supply.

9C1: Incorrect voltage supplied. Check power source.
9E: Power interruption detected. Verify power cord and outlet.
2E: Low voltage detected. Ensure stable power source.
9E1: Unstable voltage. Inspect home’s electrical supply.

Button Malfunction Errors (bE, bE2, bC2, 6E, 6E2, 6C2)

Button errors relate to problems with the dryer’s buttons or control panel.

bE: Stuck button. Free the button and try again.
bE2: Button malfunction. Replace faulty button.
bC2: Circuit issue. Check control board.
6E: Button overlap error. Avoid pressing multiple buttons simultaneously.
6E2: Similar to 6E. Inspect for stuck buttons.
6C2: Often indicates a scanning issue. Reset the dryer.

Door-Related Errors (dC, dE, dF, do, d0, 1 DC, 1 dF)

These errors point to problems with the dryer’s door.

dC: Door open. Close the door.
dE: Door error. Ensure proper closure.
dF: Door sensor malfunction. Check door latch.
do: Door not properly closed. Realign the door.
d0: Similar to do. Verify latch condition.
1 DC: Door lock error. Inspect lock mechanism.
1 dF: Issue with door lock. Replace lock if necessary.

Temperature Errors (tS, t5, tC, tO, t0, tE, tE3, tC5, tCS, 1 tC, 1tC5, 1tCS)

Temperature errors usually involve the dryer’s heating elements.

tS: Temperature sensor issue. Replace sensor.
t5: Overheating detected. Check for obstructions.
tC: Temperature control error. Inspect heating element.
tO: Thermostat issue. Test and replace thermostat.
t0: Similar to tO.
tE: General temperature error. Inspect all temperature-related components.
tE3: Specific sensor error. Check and replace sensor.
tC5: Malfunction with temperature control system. Consult manual.
tCS: Issue with temperature circuit. Inspect circuit board.
1 tC: Additional temperature control error. Verify all components.
1tC5: As above.
1tCS: As above.

Heating Issues (HC, hE, HC4, 1 HC)

Heating issues affect the dryer’s ability to produce heat.

HC: Heating issue. Check heating coil.
hE: Heating error. Inspect thermostat and sensors.
HC4: Heating capacity issue. Examine heating element.
1 HC: General heating malfunction. Verify all heating components.

Communication Errors (AC, Et, AE, EEE, AE4, AE3, AE5, E3, 1 AC)

Communication errors involve problems between different dryer components.

AC: Communication error. Reset dryer.
Et: Error in transmission. Check control panel.
AE: Communication module fault. Replace module.
EEE: Severe communication failure. Consult a professional.
AE4: Specific communication error. Inspect wiring connections.
AE3: Data transmission problem. Verify control board.
AE5: Similar to AE3.
E3: Code transmission error. Check sensors.
1 AC: Advanced communication issue. Refer to manual.

Frequency Errors (FC, FE, 1 FC)

Frequency errors relate to electrical frequency issues.

FC: Frequency error. Test frequency settings.
FE: Electrical frequency problem. Check power supply.
1 FC: General frequency issue. Confirm stable electrical source.

Vent Blockage Test Results (Clg, Cl9, Cg, C9, C80, C8o, C8, C90, C9o, Ct)

Vent blockage test results indicate problems with air flow.

Clg: Vent blockage detected. Clear vent.
Cl9: High blockage. Remove debris.
Cg: Partial blockage. Inspect vent and lint trap.
C9: Similar to Cg.
C80: 80% blockage. Clean vent.
C8o: As above.
C8: 80%-plus blockage. Clear all obstructions.
C90: 90% blockage. Deep-clean vent system.
C9o: Similarly critical. Ensure vent is free of debris.
Ct: Complete test. Verify proper ventilation.

Quick Fixes for Common Errors

Encountering an error code on your Samsung dryer can be frustrating, but many issues have simple solutions. By understanding these common errors and their quick fixes, you can save time and avoid the need for professional service.

Voltage Errors

Voltage errors often occur due to power supply problems.

9C1/9E: Indicates voltage fluctuations. Ensure the dryer is connected to a dedicated circuit and check for stable voltage. Inspect the power cord for damage and ensure it is properly connected.

Button Malfunction Errors

Button-related errors occur when buttons get stuck or malfunction.

bE/bE2: Implies a stuck or malfunctioning button. Press all buttons to ensure none are sticking. If the issue persists, unplug and then reconnect the dryer to reset the control board.

Door-Related Errors

Door errors usually mean the door isn’t properly shut or there’s a sensor malfunction.

dC/dE: Signals a door error. Check the door latch and hinge for proper alignment and closure. Clean any debris around the door seal and sensor.

Heating Issues

Heating-related errors can prevent the dryer from reaching or maintaining proper temperatures.

HC/hE: Indicates a heating element issue. Clean the lint filter and ensure proper airflow through exhaust vents. Inspect the heating element for any visible damage.

Temperature Errors

Temperature sensor errors often occur due to faulty sensors or poor airflow.

tS/t5: Points to a temperature sensor malfunction. Ensure the vent is clear and the dryer isn’t overloaded. Verify that the temperature sensor is properly connected and undamaged.

Communication Errors

Communication errors may be due to interrupted signals between dryer components.

AC/Et: Implies a communication fault. Check for loose or damaged wiring within the dryer. Restart the dryer and observe if the error recurs.

Frequency Errors

Frequency-related issues usually involve motor or electronic control malfunctions.

FC/FE: Denotes a frequency error. Inspect the motor for any irregular noises and ensure all connections are secure.

Vent Blockage Test Results

Vent blockage can significantly affect dryer efficiency and safety.

Clg/Cl9: Shows a vent blockage issue. Clean the lint filter and ensure that the exhaust vent is not obstructed. Use a vent cleaning brush or kit for thorough cleaning.

Maintenance Practices

Regular maintenance can prevent many common errors.

Clean the lint filter: After every load, remove lint to maintain airflow.
Ensure proper ventilation: Periodically inspect and clean the exhaust vent.
Check connections: Regularly verify that power cords and other connections are secure.

Diagnostic Module

This table provides a diagnostic summary for common error codes.

Error Code	Description	Suggested Fix
9C1/9E	Voltage fluctuation	Check power supply, inspect power cord
bE/bE2	Stuck button	Press all buttons, reset the control board
dC/dE	Door error	Inspect door latch, clean door sensor
HC/hE	Heating issue	Clean lint filter, inspect heating element
tS/t5	Temperature sensor error	Clear vent, check sensor connection
AC/Et	Communication fault	Check wiring, restart dryer
FC/FE	Frequency error	Inspect motor, secure connections
Clg/Cl9	Vent blockage	Clean lint filter, clear exhaust vent

Understanding these common Samsung dryer error codes and their quick fixes allows you to troubleshoot many issues independently. Regular maintenance and prompt attention to error codes can extend your dryer’s lifespan and improve performance.

Troubleshooting Advanced Errors

Identifying advanced Samsung dryer error codes can make a significant difference in troubleshooting complex issues. This section focuses on resolving more intricate problems, ensuring your dryer operates smoothly.

Error Code Definitions

bE1: A button stuck longer than 15 seconds.
bE2: Collapsed button detected.
dE1: Error due to a problem with the door latch.
HE1: High temperature detected outside the normal range.
AC6: Communication error between main control board and sub-control board.

Steps to Troubleshoot Advanced Errors

Button Errors (bE1, bE2)

Unplug the Dryer: Disconnect the appliance from the power source.
Inspect Buttons: Check for stuck or collapsed buttons.
Reset if Needed: Restart the dryer after ensuring buttons are free.

Door Errors (dE1)

Check Door Latch: Inspect the latch for any obstructions or damage.
Inspect Door Switch: Ensure the door switch operates correctly.
Reset the Dryer: Unplug for 30 seconds, then plug back in and test.

Heating Errors (HE1)

Inspect Heating Element: Check for signs of damage or debris.
Examine Thermostat and Thermistor: Ensure these components function properly.
Check for Vent Blockages: Ensure all vents are clear to maintain airflow.

Communication Errors (AC6)

Inspect Wiring: Check the connections between the main and sub-control boards.
Test Control Boards: Use a multimeter to test for continuity and correct voltage.
Update Firmware: Ensure the firmware is up to date.

Data Rich Detailed Table

Error Code	Definition	Troubleshooting Steps
bE1	Button stuck longer than 15 sec	Unplug dryer, inspect buttons, reset dryer after ensuring buttons are free.
bE2	Collapsed button detected	Unplug dryer, inspect buttons, replace any damaged buttons, reset appliance.
dE1	Door latch issue	Check door latch, inspect door switch, reset dryer by unplugging and plugging back in.
HE1	High temperature issue	Inspect heating element, check thermostat and thermistor, ensure vents are clear.
AC6	Communication error	Inspect wiring connections, test control boards with a multimeter, update firmware to latest version.

Regular Maintenance: Clean buttons, dors, and vents regularly to prevent dust and debris buildup.
Inspect Components: Frequently check heating elements and thermostats for signs of wear.
Update Firmware: Ensure your dryer’s firmware is current to prevent communication errors.

Understanding and troubleshooting these advanced error codes can help maintain your Samsung dryer’s longevity and efficiency, minimizing service calls and downtime.

Prevention Tips for Avoiding Error Codes

Maintaining your Samsung dryer properly can significantly reduce the occurrence of error codes. Follow these prevention tips to keep your appliance running smoothly and avoid common issues:

Clean the Lint Filter Regularly

Ensure the lint filter is cleaned after every use. A clogged lint filter can cause error codes related to airflow issues, such as “dF” or “Clg.”

Remove the lint filter: After every drying cycle, pull out the lint filter.
Clean the lint: Use your hand or a brush to remove the lint. Dispose of it properly.
Reinsert the filter: Place the clean filter back into the dryer.

Check Ventilation

Proper ventilation prevents overheating and airflow problems, which can trigger codes like “HE” or “hE.”

Inspect vent hoses: Ensure they are not kinked or blocked.
Clean the exterior vent: Remove any debris or lint buildup.
Ensure adequate spacing: Maintain the recommended distance between the dryer and the wall.

Inspect Connections

Loose or faulty connections can cause communication errors such as “AC6.”

Check electrical connections: Ensure the plug is secure and the outlet is functioning.
Inspect wiring: Look for damaged or loose wires.
Verify component connections: Ensure all internal components are properly connected.

Conduct Regular Maintenance

Regular maintenance can prevent a wide range of errors, including those related to sensors and heating elements.

Clean moisture sensors: Wipe down the sensors inside the drum periodically.
Inspect heating elements: Ensure they are clean and free of lint.
Update firmware: Check for software updates to ensure optimal performance.

Avoid Overloading

Overloading the dryer can lead to errors like “dE” (door error) by putting extra strain on the door and hinges, or “HE1” (high temperature) due to inadequate airflow.

Follow load guidelines: Refer to your dryer’s manual for recommended load sizes.
Distribute clothes evenly: Ensure clothes are evenly distributed to prevent imbalance.
Run multiple cycles: If needed, run multiple cycles instead of overloading.

Use Correct Settings

Incorrect settings can trigger various error codes and reduce efficiency.

Select appropriate cycle: Choose the cycle that matches your laundry type.
Adjust settings for special fabrics: Use the correct temperature and spin settings for delicate or heavy fabrics.
Avoid unnecessary options: Only use options and features needed for a specific load.

Inspect Door Latch

A faulty door latch can cause errors like “dE1” (door latch issue).

Check the latch mechanism: Ensure it latches and unlatches smoothly.
Clean debris: Remove any debris or buildup around the latch.
Replace if faulty: If the latch is damaged, consider replacing it.

Activity	Frequency	Description
Clean Lint Filter	After every use	Remove lint to prevent airflow issues.
Inspect Vent Hoses	Monthly	Ensure hoses are free from kinks and blockages.
Clean Moisture Sensors	Monthly	Wipe sensors to ensure accurate moisture detection.
Inspect Heating Elements	Quarterly	Check for lint buildup and clean if necessary.
Check Electrical Connections	Quarterly	Ensure power cords and outlets are secure.
Update Firmware	Semi-annually	Check and install software updates for enhanced performance.

Regularly following these preventive maintenance tips can extend the lifespan of your Samsung dryer, improve its efficiency, and minimize the likelihood of encountering error codes.

Conclusion

Mastering Samsung dryer error codes can save you time and money. By understanding both common and advanced errors, you can quickly diagnose and resolve issues without unnecessary service calls. Regular maintenance and preventive measures are key to keeping your dryer running smoothly and efficiently. Carry out these tips to extend your dryer’s lifespan and enjoy hassle-free laundry days.

Frequently Asked Questions

What are the error codes on a Samsung dryer?

Samsung dryers come with various error codes to diagnose different issues. Common codes include bE (button issue), dE (door error), HE or HE1 (heating issue), and FE (frequency error). Each code is designed to help pinpoint the problem, making it easier to troubleshoot and fix.

How to identify and fix the bE error code?

The bE error code indicates a button issue. This can often be resolved by checking all buttons on the control panel to ensure none are stuck or depressed. If the problem persists, a deeper inspection or replacement of the control panel may be necessary.

How can I clear the dE error code?

The dE error code signals a door error. First, ensure the door is properly closed. If the code persists, inspect the door latch and switches for any faults and replace them if needed.

What should I do if I see the HE or HE1 error codes?

These codes indicate a heating issue. Check the dryer’s heating element, thermostat, and thermistor for faults. Cleaning the lint filter and ensuring proper ventilation may also help resolve the problem.

What does the FE error code mean and how do I troubleshoot it?

The FE error code points to a frequency error, usually related to power supply issues. Ensuring the dryer is connected to a stable power outlet and checking for voltage consistency can help solve this issue.

How often should I perform maintenance on my Samsung dryer?

Regular maintenance, such as cleaning the lint filter and ensuring proper ventilation, should be done after every use. Additionally, inspect connections and clean internal components periodically to prevent future issues and extend the dryer’s lifespan.

How do I troubleshoot voltage errors like 9C1 and 9E?

Voltage errors like 9C1 and 9E usually stem from power supply issues. Ensure the dryer is connected to a stable power outlet. If the problem continues, inspect the home’s electrical system for any inconsistencies or seek professional help.

What are the common prevention tips to avoid Samsung dryer error codes?

Common prevention tips include regular cleaning of the lint filter, ensuring proper ventilation, inspecting connections, avoiding overloading, and using the correct settings. Regular maintenance and inspection help prevent common issues, improving the dryer’s efficiency and lifespan.

What should I do if my Samsung dryer displays a communication error like AC or Et?

Communication errors such as AC or Et might indicate issues with the dryer’s control board or wiring. Inspect the connections and ensure nothing is loose or damaged. If the problem persists, it may require professional assessment.